SICK CLV490 Instructions d'exploitation télécharger pdf (Page 230)

Chapter 10 Operating Instructions

CLV490 Bar Code Scanner

Appendix

5. Connect the pulse photoelectric switch to the CDB420 or CDM490 connection module

(see Chapter 5.5.7 Connecting the "Sensor" switching input, Page 5-22).

6. Turn on the supply voltage to the CLV490.

10.10.6 Parameterize the CLV490 with the "CLV-Setup" program

1. Connect the PC to the CLV490’s auxiliary interface (see Chapter 5.5.6 Connecting the

PC, Page 5-21)

2. Start Windows and the "CLV-Setup" program on the PC.

3. Invoke the CLV490’s default setting in the "CLV-Setup" program

(see Chapter 6.1 Overview of steps for starting up the CLV490, Page 6-1).

4. Parameterize the CLV490 with the help of Chapter 6.4.4 Guide to parameterization

menu, Page 6-9 and the tab cards by following the steps described.

5. After completing parameter value alterations, download them to the CLV490!

(see chapter Chapter 6.4.1 Configuring the CLV490 via the user interface of CLV-Set-

up, Page 6-5).

1. Setting up the autofocus function (Part 1): R

EADING CONFIGURATION tab

¾ Set the following parameters:

– Scanning frequency: 800 Hz

– Start/stop ratio: auto

– Focus control: autofocus

– Autofocus mode: differential background

¾ Click on the

AUTOFOCUS PARAMETERS button.

The

AUTOFOCUS PARAMETERS tab then opens (Fig. 10-46).

¾ Set the following parameters:

– Preference of focus distance: Fix focus position: 1,200 mm (47.3 in)

(approx. 100 mm (3.9 in) above the packet with the smallest height)

Fig. 10-45: Parameterization example: settings on the "Reading Configuration" tab

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 269 270

Pas de commentaire

SICK CLV490 Instructions d'exploitation Page 230